XOAR Aluminum Quick-Release Adapter for Quadcopter & Multirotors Propellers 18 inch and below

$50.00

XOAR New patent pending Quick Release Adapter for Quadcopters, Multirotors, drones, and Brushless Electric Motors is re-engineered to offer you the best convenience and safety for your multicopters and drones. The Adapters are made of Top Grade Aluminum and CNC machined. New locking mechanism will securely lock the adapter in place for flights while it is convenience enough for you to dismount the props in seconds. The adapters come with 2 sets of M3 mounting holes with circular diameter of 12mm and 13mm for compatible motors. These adapters fit propellers up to 18 inches. Patent Pending.

NEW SECURE LOCKING DESIGN

New patent pending locking mechanism will securely lock the adapter in place for flights.

PREMIUM MATERIAL

Made of Top Grade Aluminum and CNC processed.

EASY MOUNT & DISMOUNT

3 simple steps to mount or dismount the adapters - Push, Turn, and Release. You can conveniently mount or discount the propellers in seconds.

COMPATIBILITY

Propellers 18 inches and below for DJI Inspire 2, DJI Inspire 1, Inspire 1 V2.0, Inspire 1 Pro, Inspire 1 Pro Black Edition, Matrice 100, Matrice 600, DJI 3510H Motor, DJI 3510 Motor, DJI E800 Motor, T-Motor Motors, KDE Direct Motors or Similar Motors.

Download Installation PDF
  1. Self tightening adapters are compatible with motors with M3 mounting holes with circular diameter of 12mm and 13mm.
  2. The arrow on the self tightening adapter should be pointing to the direction of propeller rotation.
  3. Use 2 x Flat Head Screws to install the Bottom CW Adapter (Black) onto the Motor (CW) 
  4. Use 2 x Round Head Screws to install the Top Plate (Black ), Propeller (CW) onto the Top CCW Adapter (Black)
  5. It is recommended to apply threadlocker on the adapters to hold the props in more securely.
  6. IMPORTANT: Do NOT proceed to mounting the propeller & adapter onto the motor if the round head screws stick out on the inside of the adapter after installation. Please contact XOAR at www.xoarintl.com
  7. Repeat Step 1 & 2 to install CCW Propeller, CCW Adapter (Silver) and CCW Motor
  8. Please check for loose caps and tighten them before each flight
  9. Do not screw right on the propeller. Do not over tighten screws. Use adapter plate included.
  10. Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.
MOUNTING
  1. Align the top and bottom CW adapter following the figure above
  2. Push down all the way
  3. Turn counter-clockwise while pushing down
  4. Release to lock the adapter when you can’t turn anymore
  5. Repeat steps 1-4 for CCW Propellers and Adapters. At step 3, please turn clockwise instead.
DISMOUNTING
  1. Push down all the way
  2. Turn clockwise to unlock the CW adapter
  3. Release to dismount adapter when you can’t turn anymore
  4. Repeat steps 1-3 for CCW Propellers and Adapters. At step 2, please turn counter-clockwise instead.

 

  • 4 x Aluminum Self Tightening Adapter (2 Silver for CWW, 2 Black for CW)
  • 10 x M3 Round Head Screws
  • 10 x M3 Flat Head Screws
  • 1 x Hex L-wrench for M3 screws.
Do not over tighten screws.
Adapters:
  • Each adapter has 3 pieces - Top Plate, Top Self-tightening Adapter, Bottom Self-tightening Adapter.
  • Each Adapter weights 11.6 g

Customer Reviews